powerdi is a registered trademark of diodes incorporated. DXTN07100BP5 document number: ds32023 rev. 3 - 2 1 of 7 www.diodes.com may 2014 ? diodes incorporated DXTN07100BP5 advance information a product line o f diodes incorporated 100v npn medium power low saturation transistor powerdi ? 5 features ? bv ceo > 100v ? i c = 2a high continuous collector current ? i cm = 6a peak collector current ? p d up to 3.2w ? 43% smaller than sot223; 60% smaller than to252 ? maximum height just 1.1mm ? totally lead-free & fully rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) ? qualified to aec-q101 standards for high reliability mechanical data ? case: powerdi5 ? case material: molded plasti c, ?green? molding compound. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish ? matte tin plated leads, solderable per mil-std-202, method 208 ? weight: 0.093 grams (approximate) applications ? voltage regulator using emitter-follower ? dc-dc converter ? telecoms ? power management ordering information (note 4) product compliance marking reel size (inches) tape width (mm) quantity per reel DXTN07100BP5-13 aec-q101 dtn7100b 13 16 5,000 notes: 1. no purposely added lead. fully eu directiv e 2002/95/ec (rohs) & 2011/6 5/eu (rohs 2) compliant. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- a nd antimony-free, "green" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4. for packaging details, go to our website at http://www.diodes.com/p roducts/packages.html marking information top view bottom view top view pin-out device schematic dtn7100b = product type marking code = manufacturers? code marking k = factory designator yyww = date code marking yy = last two digits of year (ex: 09 for 2009) ww = week code (01 to 53) c e b yywwk dtn7100b
powerdi is a registered trademark of diodes incorporated. DXTN07100BP5 document number: ds32023 rev. 3 - 2 2 of 7 www.diodes.com may 2014 ? diodes incorporated DXTN07100BP5 advance information a product line o f diodes incorporated absolute maximum ratings (@t a = +25c, unless otherwise specified.) characteristic symbol value unit collector-base voltage v cbo 120 v collector-emitter voltage v ceo 100 v emitter-base voltage v ebo 7 v continuous collector current i c 2 a peak pulse current i cm 6 a thermal characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol value unit power dissipation (note 5) p d 3.2 w (note 6) 1.7 (note 7) 0.74 thermal resistance, junction to ambient air (note 5) r ja 39 c/w (note 6) 75 (note 7) 169 thermal resistance, junction to leads (note 8) r jl 9 operating and storage temperature range t j , t stg -55 to +150 c esd ratings (note 9) characteristic symbol value unit jedec class electrostatic discharge - human body model esd hbm 4,000 v 3a electrostatic discharge - machine model esd mm 400 v c notes: 5. for a device mounted with the exposed collector pad on 50mm x 50mm 2oz copper that is on a single-sided 1.6mm fr4 p cb; device is measured under still air conditions whilst operating in a steady-state. 6. same as note (5), except mounted on 25mm x 25mm 1oz copper. 7. same as note (5), except mounted on minimum recommended pad (mrp) layout. 8. thermal resistance from junction to solder-point (on the exposed collector pad). 9. refer to jedec specification jesd22-a114 and jesd22-a115.
powerdi is a registered trademark of diodes incorporated. DXTN07100BP5 document number: ds32023 rev. 3 - 2 3 of 7 www.diodes.com may 2014 ? diodes incorporated DXTN07100BP5 advance information a product line o f diodes incorporated thermal characteristics and derating information 10 100 1000 10000 20 40 60 80 100 120 140 160 180 10 100 1000 10000 0 1 2 3 4 100m 1 10 100 10m 100m 1 10 single pulse. t a =25c 50mm x 50mm 2oz fr4 v ce(sat) limited 100s 1ms 10ms 100ms 1s dc safe operating area i c collector current (a) v ce collector-emitter voltage (v) 0 25 50 75 100 125 150 175 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 mrp 1oz fr4 25mm x 25mm 1oz fr4 50mm x 50mm 2oz fr4 derating curve temperature (c) max power dissipation (w) 100 1m 10m 100m 1 10 100 1k 0 10 20 30 40 power rating vs. cu area thermal resistance vs. cu area 50mm x 50mm 2oz fr4 transient thermal impedance d=0.5 d=0.2 d=0.1 single pulse d=0.05 thermal resistance (c/w) pulse width (s) 100 1m 10m 100m 1 10 100 1k 1 10 100 single pulse. t amb =25c 50mm x 50mm 2oz fr4 pulse power dissipation pulse width (s) max power dissipation (w) 2 oz. weight copper t a = 25c copper area (sq mm) thermal resistance (c/w) 1 oz. weight copper 1 oz. weight copper 2 oz. weight copper power rating (w) copper area (sq mm) t a = 25c
powerdi is a registered trademark of diodes incorporated. DXTN07100BP5 document number: ds32023 rev. 3 - 2 4 of 7 www.diodes.com may 2014 ? diodes incorporated DXTN07100BP5 advance information a product line o f diodes incorporated electrical characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol min typ max unit test condition collector-base breakdown voltage bv cbo 120 ? ? v i c = 100a collector-emitter breakdown voltage (note 10) bv ceo 100 ? ? v i c = 10ma emitter-base breakdown voltage bv ebo 5 ? ? v i e = 100a collector cutoff current i cbo ? ? 0.1 10 a v cb = 100v v cb = 100v, t amb = +100c emitter cutoff current i ebo ? ? 0.1 a v eb = 4v collector-emitter saturation voltage (note 10) v ce(sat) ? 0.13 0.23 0.3 0.5 v i c = 1a, i b = 100ma i c = 2a, i b = 200ma base-emitter saturation voltage (note 10) v be(sat) ? 0.9 1.25 v i c = 1a, i b = 100ma base-emitter turn-on voltage (note 10) v be(on) ? 0.8 1.00 v i c = 1a, v ce = 2v dc current gain (note 10) h fe 70 100 55 25 200 200 110 55 ? 300 ? ? ? i c = 50ma, v ce = 2v i c = 500ma, v ce = 2v i c = 1a, v ce = 2v i c = 2a, v ce = 2v transition frequency f t 140 175 ? mhz i c = 100ma, v ce = 5v f = 100mhz output capacitance c obo ? ? 30 pf v cb = 10a, f = 1mhz switching times t on t off ? 80 1200 ? ns ns i c = 500ma, v cc = 10v, i b1 = i b2 = 50ma note: 10. pulse test: pulse width 300s. duty cycle 2.0%.
powerdi is a registered trademark of diodes incorporated. DXTN07100BP5 document number: ds32023 rev. 3 - 2 5 of 7 www.diodes.com may 2014 ? diodes incorporated DXTN07100BP5 advance information a product line o f diodes incorporated typical electrical characteristics (@t a = +25c, unless otherwise specified.) 1m 10m 100m 1 10m 100m 1 10m 100m 1 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1m 10m 100m 1 10 0 100 200 1m 10m 100m 1 0.2 0.4 0.6 0.8 1.0 1.2 1m 10m 100m 1 0.2 0.4 0.6 0.8 1.0 1.2 10m 100m 1 10 100 0 5 10 15 20 25 30 35 40 45 50 i c /i b =50 v ce(sat) v i c tamb=25c i c /i b =20 i c /i b =100 i c /i b =10 v ce(sat) (v) i c collector current (a) 100c v be(sat) v i c i c /i b =10 150c 25c -55c v ce(sat) (v) i c collector current (a) 150c h fe v i c v ce =2v -55c 2 5 c 1 0 0 c i c collector current (a) 150c 25c v ce(sat) v i c i c /i b =10 100c -55c v be(sat) (v) i c collector current (a) 150c v be(on) v i c v ce =2v 100c 25c -55c v be(on) (v) i c collector current (a) capacitance v voltage f = 1mhz cobo capacitance (pf) voltage(v) typical gain (h fe )
powerdi is a registered trademark of diodes incorporated. DXTN07100BP5 document number: ds32023 rev. 3 - 2 6 of 7 www.diodes.com may 2014 ? diodes incorporated DXTN07100BP5 advance information a product line o f diodes incorporated package outline dimensions please see ap02002 at http://www.diodes.com /datasheets/ap02002.pdf for latest version. suggested pad layout please see ap02001 at http://www.diodes.com /datasheets/ap02001.pdf for latest version. note: for high voltage applications, the appropriate industry sector guidelines should be considered with regards to creepage and clearance distances between device terminals and pcb tracking. powerdi ? 5 dim min max a 1.05 1.15 a2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 d 3.90 4.05 d2 3.054 typ e 6.40 6.60 e 1.84 typ e1 5.30 5.45 e2 3.549 typ l 0.75 0.95 l1 0.50 0.65 w 1.10 1.41 all dimensions in mm dimensions value (in mm) z 6.6 x1 1.4 x2 3.6 y1 0.8 y2 4.7 c 3.87 e1 0.9 z c x2 e1 x1 y1 y2 e e1 b1 a a2 a2 d b2 b1 e d2 l e2 l1 w
powerdi is a registered trademark of diodes incorporated. DXTN07100BP5 document number: ds32023 rev. 3 - 2 7 of 7 www.diodes.com may 2014 ? diodes incorporated DXTN07100BP5 advance information a product line o f diodes incorporated important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when prope rly used in accordance with instructions for use provided in the labeling can be reasonably expected to re sult in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2014, diodes incorporated www.diodes.com
|
